🎸 Blues · 2010s+

Bound for Glory by Tedeschi Trucks Band (Riff · Distorted) — Guitar Tone

by Tedeschi Trucks Band · riff

The Bound for Glory by Tedeschi Trucks Band guitar tone is built on a Fender Super Reverb, dialed in at gain 6/10, bass 4.5, mid 5, treble 6.5, presence 5 (community-researched baseline). Full breakdown below — then adapt every knob to your exact guitar and amp, free.

🎛️ These settings are for the original rig — re-dial them for YOUR amp in 10 seconds. Free, no signup →

Amp settings (0–10)

GAIN

4.5

BASS

MID

6.5

TREBLE

PRESENCE

REVERB

Community-researched baseline. Your rig is different — GuitarToneAdapt re-dials every knob for your specific guitar, amp and pickups.

How these settings compare

Measured against the 54 blues tones in our researched catalog: Gain 6 sits above the blues average (4.6) — a hotter, more saturated take than most blues tones; mids at 5 are below average (6.5).

Guitar controls

8-9

VOLUME

8-10

TONE

Original gear

Guitar: Gibson SG Standard (Derek Trucks signature or vintage spec, likely late 60s/early 70s style) · Amp: Fender Super Reverb (blackface, vintage 1965-67, 4x10 combo, no master volume)

Studio recording, album version, released 2016. Derek Trucks is known for using his SG into a cranked Fender Super Reverb with minimal pedals for the main riff. No evidence of live rig or alternate amps for this specific recording.

Gear used on this tone

🎚️ Gibson SG songs & tones →🎚️ humbucker guitars songs & tones →

Don’t own this gear? GuitarToneAdapt re-creates the sound on the rig you actually have.

Pickups

Neck pickup

Signal chain

Gibson SG Standard (Derek Trucks signature or vintage spec, likely late 60s/early 70s style) → Fender Super Reverb (blackface, vintage 1965-67, 4x10 combo, no master volume)

Effects

reverb

Amp effects: Reverb (spring, level 2)

Tone character

warm and smooth, singing sustain, touch-sensitive, edge-of-breakup crunch, clear slide articulation, full-bodied midrange, slightly compressed attack, open and dynamic, minimal pedal coloration, harmonically rich

Recording context

studio

How it’s played

straight, medium tempo, medium dynamics · edge distortion. This shapes how hard the amp is pushed and where the EQ sits for the Bound for Glory sound.

Difficulty

3.5/5 · Riff

The riff requires intermediate slide technique, dynamic control for edge-of-breakup tones, and precise timing/groove, but does not involve advanced speed or complex chord voicings.

Worth knowing

No direct studio documentation for 'Bound for Glory' riff section gear; gear and settings inferred from Derek Trucks' well-documented studio rig and multiple interviews for this era.
No explicit pedal or effect use confirmed for the riff section; Derek Trucks is known for minimal pedal use and running straight into the amp for rhythm/riff parts.
Amp settings are based on forum posts and interviews for Derek Trucks' Super Reverb setup, not specific to this song but consistent with his standard approach.
Pickup choice inferred from typical slide/riff tone and Derek Trucks' preference for neck pickup on SG.
Settings cross-referenced with genre and era conventions for accuracy. Derek Trucks is known for a warm, dynamic, edge-of-breakup slide tone using a Fender Super Reverb or similar amp, with mids and bass pushed for fullness, treble and presence kept moderate to avoid harshness, and moderate reverb for space. The riff in 'Bound for Glory' has that classic blues-rock warmth and sustain, but remains articulate and not overly driven.

⚡ Same tone, YOUR gear — re-dials the gain & EQ for your amp and pickups, free →

🎧 Can you guess the tone?

Recognise famous songs from just the amp dials — a quick 10-round game. Beat your friends. Play free →

🎸 Which guitar legend is your tone twin? Take the quiz & share your result →

Bound for Glory guitar tone — FAQ

What amp settings do I need for the Bound for Glory guitar tone?

Set your amp to roughly: gain 6, bass 4.5, mid 5, treble 6.5, presence 5, reverb 3. These are community-researched baselines — GuitarToneAdapt re-dials them for your exact guitar and amp.

What gear was used for the Bound for Glory tone?

Original gear/effects: Guitar: Gibson SG Standard (Derek Trucks signature or vintage spec, likely late 60s/early 70s style) · Amp: Fender Super Reverb (blackface, vintage 1965-67, 4x10 combo, no master volume); reverb.

Can I get the Bound for Glory tone on a different guitar or amp?

Yes. Different guitars and amps need different knob positions to sound the same. GuitarToneAdapt models pickup output and wood brightness, then compensates so you match the record on your own rig.

How do I sound like Tedeschi Trucks Band on Bound for Glory — what gear and pedals?

Start with Neck pickup, the amp EQ above (gain 6, bass 4.5, mid 5, treble 6.5, presence 5, reverb 3), and reverb. Then let GuitarToneAdapt compensate for the guitar, amp and pedals you actually own so it sits like the record.

Share this tone

Sources

Free practice tools

🎤 Online guitar tuner → · 🎶 Guitar chords → · 🎸 Guitar tunings → · 🎚️ Tuning chart → · 🎼 Guitar scales → · 🎚️ Chord transposer & capo → · 🥁 Metronome → · 🎶 Song chords → · 🎧 Guess the Tone game → · 🎸 Tone Legend quiz → · 📊 Tone data report →

🔥 The most famous guitar tones of all time → · 🎯 Easy guitar songs to play (with settings) → · 🗂️ Browse tone collections (by genre & language) →

More like this

🎸 more Blues guitar tones → · 🎛️ best blues amp settings → · 🎸 more iconic guitar riffs → · 🎯 more singing sustain tones → · 📖 New to amp settings? What every knob does →

Settings are community-researched estimates, not official. GuitarToneAdapt adapts them to your gear. guitartoneadapt.com