🎸 Rock · 2000s

Take Me Away (from Freaky Friday) by Lash (Solo · Distorted) — Guitar Tone

by Lash · solo

The Take Me Away (from Freaky Friday) by Lash guitar tone is built on a Unknown, dialed in at gain 7/10, bass 6, mid 6.5, treble 7, presence 6 (community-researched baseline). Full breakdown below — then adapt every knob to your exact guitar and amp, free.

🎛️ These settings are for the original rig — re-dial them for YOUR amp in 10 seconds. Free, no signup →

Amp settings (0–10)

7
GAIN
6
BASS
6.5
MID
7
TREBLE
6
PRESENCE
3.5
REVERB

Community-researched baseline. Your rig is different — GuitarToneAdapt re-dials every knob for your specific guitar, amp and pickups.

How these settings compare

Measured against the 540 rock tones in our researched catalog: Gain 7 sits well above the rock average (4.8) — a hotter, more saturated take than most rock tones; mids at 6.5 are right around average (6.2).

Guitar controls

8-9
VOLUME
7-8
TONE

Original gear

Guitar: Unknown model (likely mid-2000s import electric, possibly Yamaha Pacifica or Squier Strat-style, as used by Lash in era and film) · Amp: Unknown (likely solid-state combo or Marshall-style amp, as typical for pop-punk/alt-rock studio tones in early 2000s Australia)

No direct evidence of exact guitar or amp model for the studio recording. Lindsay Lohan mimed the solo in the film, but the actual recording was by Lash (Australian pop-punk band). No official rig rundown or studio notes found. All settings and gear are estimated based on genre, era, and typical pop-punk/alt-rock production of early 2000s. Studio recording, 2003.

Gear used on this tone

🎚️ Marshall songs & tones →🎚️ Fender Stratocaster songs & tones →🎚️ humbucker guitars songs & tones →🎚️ single-coil guitars songs & tones →

Don’t own this gear? GuitarToneAdapt re-creates the sound on the rig you actually have.

Pickups

Bridge pickup

Signal chain

Unknown model (likely mid-2000s import electric, possibly Yamaha Pacifica or Squier Strat-style, as used by Lash in era and film) → Distortion pedal (model unknown) → Delay pedal (model unknown) → Unknown (likely solid-state combo or Marshall-style amp, as typical for pop-punk/alt-rock studio tones in early 2000s Australia)

Effects

distortion, delay, reverb

Amp effects: Reverb (spring, level 4)

Tone character

aggressive and saturated, singing sustain, tight, compressed attack, bright and articulate, slight midrange emphasis, cutting top end, modern pop-punk/alt-rock solo sound, radio-ready clarity, not muddy or vintage, no excessive low end

Recording context

studio

How it’s played

straight, fast tempo, loud dynamics · high-gain distortion. This shapes how hard the amp is pushed and where the EQ sits for the Take Me Away (from Freaky Friday) sound.

Difficulty

3/5 · Solo

The solo requires intermediate technique due to its fast tempo, use of bends/vibrato, and the need for clean articulation with delay. Not overly technical, but above beginner level.

Worth knowing

⚡ Same tone, YOUR gear — re-dials the gain & EQ for your amp and pickups, free →
🎧 Can you guess the tone?
Recognise famous songs from just the amp dials — a quick 10-round game. Beat your friends. Play free →
🎸 Which guitar legend is your tone twin? Take the quiz & share your result →

Take Me Away (from Freaky Friday) guitar tone — FAQ

What amp settings do I need for the Take Me Away (from Freaky Friday) guitar tone?

Set your amp to roughly: gain 7, bass 6, mid 6.5, treble 7, presence 6, reverb 3.5. These are community-researched baselines — GuitarToneAdapt re-dials them for your exact guitar and amp.

What gear was used for the Take Me Away (from Freaky Friday) tone?

Original gear/effects: Guitar: Unknown model (likely mid-2000s import electric, possibly Yamaha Pacifica or Squier Strat-style, as used by Lash in era and film) · Amp: Unknown (likely solid-state combo or Marshall-style amp, as typical for pop-punk/alt-rock studio tones in early 2000s Australia); distortion, delay, reverb.

Can I get the Take Me Away (from Freaky Friday) tone on a different guitar or amp?

Yes. Different guitars and amps need different knob positions to sound the same. GuitarToneAdapt models pickup output and wood brightness, then compensates so you match the record on your own rig.

How do I sound like Lash on Take Me Away (from Freaky Friday) — what gear and pedals?

Start with Bridge pickup, the amp EQ above (gain 7, bass 6, mid 6.5, treble 7, presence 6, reverb 3.5), and distortion, delay, reverb. Then let GuitarToneAdapt compensate for the guitar, amp and pedals you actually own so it sits like the record.

Share this tone

𝕏 PostRedditFacebook

Sources

Free practice tools

🎤 Online guitar tuner →  ·  🎶 Guitar chords →  ·  🎸 Guitar tunings →  ·  🎚️ Tuning chart →  ·  🎼 Guitar scales →  ·  🎚️ Chord transposer & capo →  ·  🥁 Metronome →  ·  🎶 Song chords →  ·  🎧 Guess the Tone game →  ·  🎸 Tone Legend quiz →  ·  📊 Tone data report →

🔥 The most famous guitar tones of all time →  ·  🎯 Easy guitar songs to play (with settings) →  ·  🗂️ Browse tone collections (by genre & language) →

More like this

🎸 more Rock guitar tones →  ·  🎛️ best rock amp settings →  ·  🎸 more iconic guitar solos →  ·  🎚️ Delay tone guide →  ·  🎯 more singing sustain tones →  ·  📖 New to amp settings? What every knob does →

Related tones

Boys Don't Cry — The CureWay Down We Go — KALEOSweet Child O' Mine — Guns N' RosesHotel California — EaglesAin't Talkin' 'Bout Love — Van HalenSweet Child O' Mine — Guns N' Roses
Settings are community-researched estimates, not official. GuitarToneAdapt adapts them to your gear. guitartoneadapt.com