🎸 Rock · 2000s

Blvd. Nights by Team Sleep (Riff · Distorted) — Guitar Tone

by Team Sleep · riff

The Blvd. Nights by Team Sleep guitar tone is built on a Unknown, dialed in at gain 5.5/10, bass 5.5, mid 5.5, treble 6.5, presence 5.5 (community-researched baseline). Full breakdown below — then adapt every knob to your exact guitar and amp, free.

🎛️ These settings are for the original rig — re-dial them for YOUR amp in 10 seconds. Free, no signup →

Amp settings (0–10)

5.5

GAIN

5.5

BASS

5.5

MID

6.5

TREBLE

5.5

PRESENCE

4.5

REVERB

Community-researched baseline. Your rig is different — GuitarToneAdapt re-dials every knob for your specific guitar, amp and pickups.

How these settings compare

Measured against the 540 rock tones in our researched catalog: Gain 5.5 sits right around the rock average (4.8); mids at 5.5 are right around average (6.2).

Guitar controls

8-9

VOLUME

7-8

TONE

Original gear

Guitar: Unknown (likely Fender Jazzmaster or Fender Jaguar, as used by Chino Moreno in Team Sleep era) · Amp: Unknown (likely Fender Twin Reverb or similar clean amp, based on genre and era)

No direct source confirms exact guitar or amp for 'Blvd. Nights' riff. Chino Moreno is known to use Fender offsets and clean Fender amps for Team Sleep. Studio recording, 2005 album release.

Gear used on this tone

🎚️ Fender Twin Reverb songs & tones →🎚️ single-coil guitars songs & tones →🎚️ Fender Jazzmaster songs & tones →🎚️ Fender Jaguar songs & tones →

Don’t own this gear? GuitarToneAdapt re-creates the sound on the rig you actually have.

Pickups

Neck pickup (likely, for warmth and smoothness in riff)

Signal chain

Unknown (likely Fender Jazzmaster or Fender Jaguar, as used by Chino Moreno in Team Sleep era) → Chorus pedal (model unknown) → Reverb pedal (model unknown) → Unknown (likely Fender Twin Reverb or similar clean amp, based on genre and era)

Effects

chorus, reverb

Amp effects: Reverb (spring, level 6.5)

Tone character

spacious and ambient, lush modulated reverb, smooth, not harsh, ethereal and dreamy, slightly dark, not overly bright, wide stereo image, soft attack, subtle modulation movement, not compressed or tight, clean with edge-of-breakup warmth

Recording context

studio

How it’s played

straight, medium tempo, medium dynamics · edge distortion. This shapes how hard the amp is pushed and where the EQ sits for the Blvd. Nights sound.

Difficulty

2.5/5 · Riff

The riff is not technically complex but requires careful control of dynamics, clean playing, and sensitivity to modulation and reverb effects to achieve the lush, ambient tone.

Worth knowing

No direct source confirms exact guitar, amp, or pedal models for 'Blvd. Nights' riff section.
Pedal and amp choices are inferred from Chino Moreno's known gear and the audible effects in the recording.
Settings are estimated based on typical Fender amp settings for shoegaze/ambient rock in the 2000s.
No numeric amp or pedal settings found in sources; all values are inferred.
No studio documentation or rig rundown available for this specific song/section.
Settings cross-referenced with genre and era conventions for accuracy. Team Sleep's 'Blvd. Nights' riff features a saturated, modern alternative rock tone with tight low end, balanced mids, and slightly rounded highs, typical of Chino Moreno's Deftones-adjacent sound. The gain is high but not extreme, with moderate bass and presence for clarity, and minimal reverb as per early 2000s production trends.

⚡ Same tone, YOUR gear — re-dials the gain & EQ for your amp and pickups, free →

🎧 Can you guess the tone?

Recognise famous songs from just the amp dials — a quick 10-round game. Beat your friends. Play free →

🎸 Which guitar legend is your tone twin? Take the quiz & share your result →

Blvd. Nights guitar tone — FAQ

What amp settings do I need for the Blvd. Nights guitar tone?

Set your amp to roughly: gain 5.5, bass 5.5, mid 5.5, treble 6.5, presence 5.5, reverb 4.5. These are community-researched baselines — GuitarToneAdapt re-dials them for your exact guitar and amp.

What gear was used for the Blvd. Nights tone?

Original gear/effects: Guitar: Unknown (likely Fender Jazzmaster or Fender Jaguar, as used by Chino Moreno in Team Sleep era) · Amp: Unknown (likely Fender Twin Reverb or similar clean amp, based on genre and era); chorus, reverb.

Can I get the Blvd. Nights tone on a different guitar or amp?

Yes. Different guitars and amps need different knob positions to sound the same. GuitarToneAdapt models pickup output and wood brightness, then compensates so you match the record on your own rig.

How do I sound like Team Sleep on Blvd. Nights — what gear and pedals?

Start with Neck pickup (likely, for warmth and smoothness in riff), the amp EQ above (gain 5.5, bass 5.5, mid 5.5, treble 6.5, presence 5.5, reverb 4.5), and chorus, reverb. Then let GuitarToneAdapt compensate for the guitar, amp and pedals you actually own so it sits like the record.

Share this tone

Sources

Free practice tools

🎤 Online guitar tuner → · 🎶 Guitar chords → · 🎸 Guitar tunings → · 🎚️ Tuning chart → · 🎼 Guitar scales → · 🎚️ Chord transposer & capo → · 🥁 Metronome → · 🎶 Song chords → · 🎧 Guess the Tone game → · 🎸 Tone Legend quiz → · 📊 Tone data report →

🔥 The most famous guitar tones of all time → · 🎯 Easy guitar songs to play (with settings) → · 🗂️ Browse tone collections (by genre & language) →

More like this

🎸 more Rock guitar tones → · 🎛️ best rock amp settings → · 🎸 more iconic guitar riffs → · 🎚️ Chorus tone guide → · 🎯 more tight tones → · 📖 New to amp settings? What every knob does →

Settings are community-researched estimates, not official. GuitarToneAdapt adapts them to your gear. guitartoneadapt.com